Install Smartcomgps v.1.55 on Nokia E66

Few steps before installation of SmartComGPS ver.1.56
note) for correct installation of SmartComGPS with internal GPS support,
you need to complete the steps described below. (from #1 to #7)
IMPORTANT) on the phone has to be installed
the file manager software
X-plore version 1.22 or newer

1. Download, unpack the RAR-archive on your PC and copy the folder "CERTKIT-v9.2" that contains two files onto your phone's SD card.
to download, click here

2. Open the file "Hellocarbide.sis" from the folder "CERTKIT-v9.2" on your phone,
to begin the installation process (see pic.2a-f)


pic.2a	pic.2b	pic.2c


pic.2d	pic.2e	pic.2f

3. In the application X-plore go to Menu -> Tools -> Configuration
and mark two field in the configuration dialog box.

v) Show Hidden files
v) Show system files/folders


pic.3a	pic.3b

4. !!!) Don't close the X-plore (just leave it in the background mode) see pic.5a

4.1) press the keyboard MENU button, go to [Installations]
4.2) find and start the Hellocarbide (see pic.4a)
4.3) choose [Options] -> Menu 1 (see pic.4b-c)
4.4) for all next dialog boxes press "YES" (see pic.4d-f)
*) be patient, there'll be around 82 "YES" dialog boxes
**) the last "YES" closes the application and you're back at [Installations] screen (see pic.4a)


pic.4a	pic.4b	pic.4c


pic.4d	pic.4e	pic.4f

5. Go back to X-plore (hope it's not closed and hanging in the background mode)Press and hold the keyboard's MENU button for 2 sec.
in popup menu, choose the X-plore. (see pic.5a)

5.1) Copy the file "installserver.exe" from the folder CERTKIT-v9.2\
to the path C:\sys\bin\ (verify that it's copied to the needed destination)
5.2) Exit the application X-plore


pic.5a	pic.5b

6. Turn OFF / ON the phone.

7. Deinstall the application Hellocarbide.

keyboard's [MENU] button -> [Tools] -> [Installations] -> [App.mgr.] ->
from the list pickup Hellocarbide -> Options -> Remove

Installation process of SmartComGPS version 1.56 on Nokia e66 - e71

8. If you haven't downloaded SmartComGPS version 1.56 yet, then click here.
Unpack the RAR-file on your PC and copy the file "Smartcomgps-s60v3-internal-gps-unsigned.sis" to a phone's SD card.

9. Install the application (see pic.9a-e), activate a trial version at
smartcomgps.gpswildmap.com

Then input a registration code into SmartComGPS -> Menu -> Register.


pic.9a	pic.9b	pic.9c


pic.9d	pic.9e

10. Copy a map to the path E:\data\SmartcomGPS\maps\

To turn on the internal GPS support. Go to SmartComGPS -> Menu -> Settings -> Main -> Use internal GPS (yes).
then exit the application and start SmartComGPS again.

*) Internal gps-receiver is connected automaticaly when the application is started and disconnected when with its exit.